A well-known and quality oriented manufacturer and supplier offer top-class Electro Magnetic Lifters, which incorporate permanent magnets in conjunction with steel parts. The highest quality permanent magnets provide the power for an indefinite period of time. An external power source is not required that means Electro -Permanent Lifting Magnets cannot loose their power because of a mains power failure. The magnetic power of an electro permanent lifting magnet is turned ON and OFF by means of electricity, a short current surge. After that the magnet could be disconnected from the control and can be used as a "self contained" device.

• As the Electric Magnetic Lifter Systems is useful in wide range for lift the material, such as Steel plates, work piece, machine parts, molds iron material…etc.
• The above items can be use alone like as ELD-S, ELD-S(Single type) , and also can be Combine many piece of lifter together in use like as ELC, ELD.
• These Electric Lifter systems must be cooperate continual electric power to operate.
• The Lifter working rate at 50% Effective Duts by cycle of repeating to electrify for 5 minutes.
• These type can be cooperate the robot and connect in computer program for pickup and down the work piece, such as CNC machine.
• Easy to operate and increase working efficient very much.

• As these Lifter Combination Type STR is for move and hold bigger steel plate.

• As these Lifter Single Type STR-S is for move and hold the workpiece, molds, machine parts & smaller steel plate.....etc.

• As these Lifter Combination Type STR is for move and hold bigger steel plate, especially in thinner steel plate

• As these Lifter Single Type STR-S is for move and hold the workpiece, molds, machine parts & smaller steel plate.....etc. Especially in thinner material.

• As these Rectifier Type is for control the lifter Model : STR & ST

The holding power changes dependently on the attractive face, quality of material, thickness of material and clearance between the materiel and magnet. The Conventing Formula of Holding power is same as our Permanent Magnetic Lifter.

Workpiece must be thick enough and the surface must be free and dust magnetic attraction is best and with low carbon - soft steel.